Fear in skateboarding is very common among skateboarders. Fear of falling hinders them to be a great skateboarder. Though it is true that fear protects us from accidentally killing ourselves. Several doctors and sports physiologists gave advice about how to overcome fear in skateboarding.

Conquering your fear is one of the main parts of skateboarding. Managing a small plank of wood is not easy. Accidents can happen at any time. This fear indeed makes us fearful of skateboarding but does not help to overcome it.

The main thing is you must conquer your phobia of skateboarding at first.

Why am I scared of skateboarding?

The fear of skateboarding sometimes comes from your inner pushing to learn skateboarding too fast. Maybe you bought a new skateboard and start jumping and landing swiftly. It may cause an accident and you are scared. Take your time and learn at first with your own speed.

Do not get upset if you fall several times. Actually, falling helps you to be confident in skateboarding. Every time you fall, you will find your mistakes and can do better.

Choose better skateboards with the specifications that fit you. You can manage it properly. So, the chance of injury decreased and you can get rid of fear in skateboarding.

Some tips to overcome the fear in skateboarding

The only way to overcome your fear in skateboarding is by making sure that you are ready for skateboarding. Only you know how much you are prepared mentally and physically. Hence you can follow some tips to manage your fear.

1. Learn the Basics

At first, make sure that you know well the basics of skateboarding. Many skateboarders skip the basic learning and go straight to practice ollies and kickflips. This a very big mistake. You will never be acquainted with the nature of your board if you do not manage it properly. In the long run, you need a long time to control the board appropriately.

2. Take Time

Take enough time. Increase your speed slowly. If you are in a hurry then a severe accident may happen.

3. Don’t ignore the Fear… Use it!

Fear in riding is normal. Do not ignore it. You will not be a good skateboarder being overconfident. Ask yourself whether you are ready. Never ignore your fear but use it as a tool to overcome your fear.

4. Believe in yourself!

Just believe in yourself. Keep in mind always that you can do it if you know well the basics and practice hard. Do not be afraid much of being wounded. It does not hurt badly all the time. The more you ride carefully the less the injury.

5. Take it Slow

Learn the tricks of skateboarding slowly. There are many tricks required for the movements. Choose a trick that seems easier to you. Try again and again to master it.

6. Be careful about the fall.

Follow the tips of how to fall carefully. Choose the ways you prefer to fall. It helps a lot to overcome your fear. In the very beginning of your skateboarding, you can land on the grass. If you are afraid of being injured on the hard surface then this trick will surely help you. You can overcome your fear gradually when you know well about landing. If you wear knee pads and wrist guard, you can slide on your hand and knees. If you do not wear these try to roll.

7. Try to control your legs one by one.

If you are afraid of placing both your feet on the deck, just place only one foot. Placing both feet on the deck is known as a chicken foot. Try to place sometimes your right foot and sometimes left one. When you can control both feet separately then gradually you can place both feet while landing.

8. Take mental preparation first.

Another outstanding trick is visualizing the tricks in your head. It will help you to follow the steps properly. You can focus on your every step clearly.

9. Be Positive

Excessive fear can make you frustrated. You may get mad for being scared. Try to be confident. Think always what you can do.

10. Use Protective Gears

Protective gears like knee pads, wrist guards etc. protects you of getting much injured. It gains your confidence too. But, being overconfident leads a skateboarder to the emergency room sometimes.

11. Don’t Overthink it!

You should be careful of your frightened but do not overthink it. Overthinking of fear obstacles you to step forward. When you overthink of fear your brain and muscles deny jumping. As a result, you will never be a skateboarder.

12. Be patient

All we know is that none can land properly at the very beginning. You will fail over and over again until you get success.

13. Watch Videos

There are a lot of videos now-a-days. They show the techniques to land properly.  They explain sometimes the science behind landing. Though watching video does not make you a skateboarder. You just watch them to keep in mind the tricks. While landing on the ground memorize the events they showed in the videos. These tricks will help you a lot.

14. Take help from others.

You need a lot of time if you only practice yourself. Try to practice with your dear one who can help you telling your good or bad performance. You can ask for advice to him without hesitation.

15. Don’t get frustrated!

Never look at others’ performances when you have fear in mind. Their good performance will make you more frustrated. Just look at yourself. Keep in mind that no one can reach the top without trying more and more. Looking at others’ performances is nothing but a waste of time.

16. Don’t mind others!

Many new skateboarders are afraid of skateboarding in public. They feel shy whether people comment negatively. You have to think that everyone passed this situation. People who never skate they are different. They pass comments without knowing anything about skateboarding. Just ignore them and focus on your landing.

Conclusion…

In the final word, we can say that fear in skateboarding is very common.  You should never ignore it. Rather value it. Your fear leads you to success. Your fear makes you conscious. Try your best again and again to be aware of the issues you fear while riding.

Ignore the comment of others. You skate only for yourself, not for others. So if you are confident then others comments do no harm to you.

People of all ages like skating especially the younger ones. Collecting and riding on different types of skateboards are their passion. But pressure cracks on the skateboard make the riding somewhat uncomfortable.

What Is Pressure Crack?

Pressure crack means cracking of something through excessive pressure over a thing. It may cause for dropping a heavy material over the product, somebody scratching on it or step on it, and so on.

What Are Pressure Cracks On A Skateboard?

Pressure cracks mean the cracks generally found around the trucks or bolts caused for constant landing on the bolts of your skateboard rather than on the middle part of the board. It is better to land on the middle area. It decreases the possibility of cracking.

Causes of Pressure Cracks On Skateboard

There are many reasons for cracking a skateboard. Like- you are heavy so it creates much pressure over the board when you land on it. Something fall over your skateboard, someone steps on it, someone uses it unconsciously, somebody scratches on it, any heavy object drop on it, or if the bolts are tightened, etc. Humidity also makes cracks on the skateboard.

Are Pressure Cracks Bad?

Cracking is not bad all the time if it is not much. It just weakens the board. You can use it for a long time. Many riders told from their experiences that pressure cracks did not hamper their riding at all.

How To Stop Pressure Crack?

You can limit or stop pressure crack on your skateboard by following some rules. These are given below:

• Do not tighten the bolts of your board.
• Get riser pads.
• Land on the perfect bolt. It keeps your board free from cracks.
• Try to control your weight. Because overweight is a cause for pressure cracks. Skateboard cannot carry much load. Or, before buying get sure about the board’s maximum weight capacity.

How To Fix A Cracked Skateboard?

Following some steps, you can fix your cracked skateboard.

• At first, check the cracks. If you can ride with it then no need to repair. But if it is much, you have to repair it. Remove the trucks and keep the board on the surface.
• Then cut the cracks with a knife.
• Remove any tape with a scraper. Remove all dust on the crack.
• Apply epoxy to cover the crack. Do it with a putty scraper and make sure that you do it gently and do not create a lot of pressure on the skateboard.
• After applying the epoxy over the cracks appropriately let the board dry for 24 hours.
• When the board dries, check the crack and smooth it with sandpaper.
• Use a gripe tape where the crack was.
• Take a test ride to ensure that the board is repaired correctly. If the board moves smoothly then it is ok. Otherwise, if there are any problems in balancing the skateboard, adjust the kingpin located at the bottom of the deck.
• Remove the bushings and tightened the kingpin while starting with the repair. If you face any problem in balancing then loosen the kingpin until you get a comfortable ride.
• Then check the stability. Ride on the board and check whether the board is going one side to another and face problems to keep it stable. If so then it is because your deck is warped. Remove the trucks and the wheels underneath.
• The final task is, immerse the skateboard in water overnight. In the morning, remove it and place a heavy object like a cement block on top of it for 24 hours. This will flatten the deck and the board gets back its original look again. Let the board completely dry.

Final Thoughts…

It is normal to have pressure cracks on skateboard. But it varied according to the type of quality of the skateboard. Good quality retro skateboards are more sustainable. So, you should choose the better one while buying.

Do you want to revert your skateboard like a pro? Skateboarding has become popular in the whole world. Skateboards are great, and also they can be used for transport. It is an excellent option for you if you live in a country where traffic is a significant problem. You can roam around with the skateboard without facing any traffic problems.

Besides the use of skateboarding, reverting skateboards has also gained popularity among the people. Learning the tricks of revert skateboarding is not something difficult. By practicing it every day, you will also be able to do it like a professional. In this article, we will talk about how to revert skateboarding.

What is revert?

To do a reverse skateboard, you will have to drag the skateboard’s wheels over to the other side while you are moving. The process of reverting skateboards mimics switching the backside to frontside. It requires a 180-degree spin to switch the sides of the skateboard while you are on the move. You can change the directions of your skateboard by reverting without stopping or using your feet.

Learn how to revert skateboarding

You must be thinking about how to revert on a skateboard or how it works? Reverting skateboards is not an easy task nor a difficult task; it all depends on your practice. Here we will inform you about three revert styles.

Read down below to learn these three styles:

1.Frontside Revert

To do a frontside revert, you want to set up your feet so that your back foot is on the tail of your board, and your front foot is over top of the front wheels, placed just a little more forward than usual. Then get some forward momentum. Now you have to bend your knees. Then turn your shoulders to face ahead.

Once you’re in the position, stand up straight and kick out your back wheels to rotate your board 180 degrees. It helps to put a little bit of your weight on the front foot at this point, so your rear wheels can slide with the smallest amount of friction possible.

2. Backside Revert

When you do backside revert, you’re going to rotate more on your back set of wheels, so you don’t need to put your front foot up past the front wheel this time. Start getting a little speed, crouch down, and turn your head and shoulders to face backward.

Once you are ready, standing up straight, kick out your back wheels, with the majority of your weight on your back foot. If your front wheel comes off the ground a little bit, that means you have your body weight in a good position. Once your board rotates, finish rotating your shoulders and turning your head to face forward.

3. Nose stall revert

The foot position in the nose stall revert is your front foot on the nose, and your back foot is over the bolts. As we go up the ramp with just enough speed to reach the coping, shift your weight over to your front foot. Now extend your front leg and bend your back leg.

This will help you to get the balance for your front leg. Keep the pressure on your front foot, and when you are ready to come back, push the skate nose in front of you. Start the turn with your shoulder and look where you’re going. As soon as you turn into 90-degree, shift your balance on the center of the board, put down all four wheels, and roll away.

Final Thoughts…

Once you become a skateboarder, more revert tricks will generate from you. When you learn to skateboard, it will become an easy transport for you. That’s why it would be better if you learned how to master the art of skateboarding and do it with more styles. Hope you find this how to revert skateboard post helpful for you.