Rollerblading is a great way to get some exercise while having fun. But before you can enjoy the experience you need to make sure you have the right equipment. However, finding the right size rollerblades can be challenging, as a poorly fitting pair can lead to discomfort and even injury.
If you’re a beginner inline skater, you may be wondering what size rollerblades you need to buy. It’s important to choose the right size rollerblades so that they’re comfortable to wear and easy to skate in.
In this blog, we will provide tips and guidelines on how to size rollerblades properly to ensure a comfortable and safe skating experience. Whether you are a beginner or an experienced skater, this blog will help you find the perfect size of rollerblades.
To determine the correct size for rollerblades, you can use a sizing chart or measure your foot using a ruler or tape measure. First, measure the length of your foot from the longest toe to the back of your heel. Next, compare your foot measurement to the size chart for the specific brand and model of rollerblades you are considering. If your measurement falls between two sizes, it’s usually best to choose the larger size for a more comfortable fit.
Let’s get to the details…
Why Size Your Own Rollerblades?
There are several reasons why it is important to size your own rollerblades:
- Comfort: Properly sized rollerblades should fit comfortably and allow you to move freely without your feet sliding around inside the boot.
- Control: Rollerblades that are too big or too small can affect your balance and control while skating. Properly sized rollerblades will allow you to skate more confidently and safely.
- Performance: Rollerblades that fit well will allow you to skate more efficiently and effectively, allowing you to get the most out of your skating experience.
- Durability: Rollerblades that are too large or too small may wear out more quickly due to the extra strain placed on the boots and bearings. Properly sized rollerblades will last longer and be more cost-effective in the long run.
How to Measure Your Foot for Rollerblade Sizing?
Measuring the Length of Your Foot
To determine the length of your foot, you will need a flexible tape measure and a hard surface to stand on. Place the end of the tape measure on the floor near the edge of the hard surface. Put your heel on the floor with your toes pointing up. Press down on your toes so that they are flat against the floor. Extend the tape measure along the top of your foot to your big toe. Record this measurement in inches or centimeters.
Measuring the Width of Your Foot
To determine the width of your foot, you will again need a flexible tape measure and a hard surface to stand on. Place one end of the tape measure on the floor near the edge of the hard surface. Put your heel on the floor with your toes pointing up. Press down on your toes so that they are flat against the floor.
With someone else helping, place the other end of the tape measure at the base of your big toe and stretch it along the top and sides of your foot to just before your ankle joint (where it meets your lower leg). Record this measurement in inches or centimeters.
Considerations for Different Foot Shapes
There are three main types of feet: high-arched feet, neutral feet, and low-arched feet. High-arched feet have a very pronounced arch, while low-arched feet have only a slight arch or no arch at all. Neutral feet fall somewhere in between these two extremes. It is important to know what type of feet you have because it can affect what size rollerblades you need as well as how comfortable you will be while skating.
For example, people with high-arched feet tend to pronate (roll inward) when they skate, which can lead to discomfort and even injuries if not properly compensated for with proper footwear and support devices such as orthotics or custom insoles.
Read: How to rollerblade backwards?
Conversely, people with low-arched feet tend to supinate (roll outward) when they skate, which can also lead to discomfort and injuries if not properly compensated for. There are many different types of rollerblades on the market, so it is important to choose a pair that will work best for your foot type.
How to Choose the Right Size Rollerblades?
Rollerblade Sizing Chart
The first step to choosing the right size rollerblades is to consult a sizing chart. Rollerblade sizes vary based on both foot length and width, so it’s important to take both measurements into account when selecting a pair of skates. There are a few different ways to measure your foot:
- Use a tape measure or ruler to measure the length of your foot from the heel to the tip of the longest toe.
- Find your shoe size on a standard size chart and use that as a reference point.
- Try on a pair of rollerblades and see how they feel.
Once you have your measurements, consult a rollerblade sizing chart (like the one below) to find the right size skate for you. Keep in mind that most brands have their own sizing charts, so be sure to check those before making your final purchase.
Size Chart:
Inline Skate Size US Men’s Shoe Size US Women’s Shoe Size EU Shoe Size UK Shoe Size Foot Length (cm)
XS (Extra Small) 5 – 6 4 – 5 37 – 38 3 – 4 22.8 – 24.1 cm
S (Small) 7 – 8 6 – 7 39 – 40 5 – 6 24.5 – 25.4 cm
M (Medium) 9-10 7-8 41-42 6-7 26-26.9 cm
L (Large) 11-12 9-10 43-44 8-9 27.3 – 28 cm
XL (Extra Large) 13+ 11+ 45+ 10+ 28.6 – 29+ cm
Adjusting Rollerblades for a Perfect Fit
Once you have your new rollerblades, it’s important to make sure they fit properly before hitting the pavement. Here are a few things you can do to adjust your skates for a better fit:
- If your toes are touching the front of the liner, try adjusting the laces or buckles for more room in the toe box.
- If your heels are slipping out of the back of the skate, try tightening the laces or buckles around the ankle area for more support.
- If your feet feel too cramped inside the skates, try loosening the laces or buckles for more wiggle room.
- You can also add an aftermarket insole or sock liner for extra padding and support where needed.
Breaking In Your New Rollerblades
Once you have your rollerblades fitting just right, it’s time to start skating! But before you hit the pavement, it’s important to break in your new skates so they’re more comfortable and easier to skate in. Here are a few tips for breaking in your rollerblades:
- Start by skating around the house or in a carpeted area to get used to the feel of the skates.
- Once you’re comfortable skating around indoors, take your skates outside and skate on smooth surfaces like sidewalks or bike paths.
- Avoid rough terrain or obstacles at first, and focus on getting used to the feel of the skates on your feet.
- As you get more comfortable skating, you can start doing more advanced tricks and skating on rougher surfaces.
- Remember to take breaks often, especially if your feet start to hurt while skating. And that’s it – enjoy your new rollerblades!
Read: Top 20 rollerblading tricks for beginners
How do I know what size rollerblades to get?
There are a few things you need to take into account when choosing the right size rollerblades. First, you need to measure your foot length and width. You can do this by tracing your foot on a piece of paper and then measuring the outline with a ruler. Once you have these measurements, you can consult a rollerblade sizing chart to find the right size for your feet.
In addition to foot length and width, you also need to consider different foot shapes when choosing the right size rollerblade. People with wide feet will need to choose a pair of rollerblades that are wider than average, while people with narrow feet will need to choose a pair that is narrower than average. You should also keep in mind that different brands of rollerblades may have slightly different sizing, so it is always best to try on a pair before purchasing them.
Once you have found the right size rollerblade, it is important to make sure they fit properly. The toes of your shoes should just barely touch the front of the liner and your heels should be firmly planted in the back. If your feet are slipping around inside the boot or if you feel any uncomfortable pressure points, then the rollerblades are not a good fit for you.
If you are having trouble finding a pair of rollerblades that fit well, there are some aftermarket products that can help improve the fit. Custom footbeds can help support your feet better and performance socks can help reduce friction and hot spots. With proper fitting gear, you will be able to enjoy skating without any discomfort or pain.
How should your Rollerblades fit?
Your Rollerblades should fit snugly but not tightly. They should be comfortable and not cause any pain or discomfort. There should be no gaps between your foot and the boot, but you should still be able to wiggle your toes. The laces should be tight enough that your foot doesn’t slip around inside the boot, but not so tight that they’re cutting off circulation.
Here are a few things to consider:
Length
Your rollerblades should be long enough to accommodate the length of your feet, with enough room to move your toes and heels comfortably. You should be able to place your index finger between your heel and the back of the boot when it’s laced up.
Width
The width of your rollerblades should match the width of your feet. If the boots are too narrow, they may feel cramped and cause pressure points on the sides of your feet. If they’re too wide, they may feel loose and unstable.
Arch support
Rollerblades should provide good arch support to help keep your feet in a natural position while skating. If the arch support feels too low or too high, it may cause discomfort or instability.
Ankle support
The ankle support of your rollerblades should be snug but not too tight. It should hold your ankles in place without restricting movement or causing discomfort.
Lacing
The lacing system of your rollerblades should allow you to adjust the fit to your preference. You should be able to tighten or loosen the laces as needed to achieve a secure and comfortable fit.
Your toes should slightly touch the front liner of the skate
To ensure that your Rollerblades fit properly, it is important that your toes have a slight amount of space (about a half inch) between your longest toe and the end of the liner. This allows you to maintain control over the skates and prevents your toes from getting cramped up inside the boot. You should be able to wiggle your toes inside the boot, but they should not have a lot of extra room.
Your heels should be firmly planted in the back of the boot
Another important aspect of proper Rollerblade fit is making sure that your heels are firmly planted in the back of the boots. This provides support for your ankles and helps to prevent injuries. You should feel stable when you are standing in your skates, and your heels should not slip out when you make turns or stop abruptly.
There shouldn’t be any gaps between your heel and the back of the skate’s boot. If there is, it means the skate is too big and your foot will slip around inside, which will make it difficult to control. You might also experience heel bruising or blisters if your heel isn’t properly supported.
Your feet should feel comfortable when you bend into a squat
One final way to check the fit of your Rollerblades is to squat down low in them. This simulates the position you will be in when you are skating, and it allows you to see how well the boots support your feet and ankles. Your feet should feel comfortable when you are in this position, and there should be no pressure points or areas where the boots are too tight or too loose.
This is a good test to see if your skates are too big or too small. If you can’t comfortably squat in them without your heels coming off the ground or your toes being cramped, then they don’t fit properly and you’ll need to adjust them accordingly.
How Can I Better My Fit?
Aftermarket Footbeds
Aftermarket footbeds are a great way to improve the fit of your rollerblades. They provide extra support and cushioning, and can help with issues like heel pain or arch pain. There are many different types of aftermarkets footbeds available, so it’s important to do some research to find the right one for you.
Performance Socks
Performance socks are another great way to improve the fit of your rollerblades. They’re designed to wick away moisture, provide extra support, and keep your feet cool and comfortable. Like aftermarket footbeds, there are many different types of performance socks available, so it’s important to do some research to find the right ones for you.
How do you try on a pair of rollerblades?
When you’re trying on a pair of rollerblades, it’s important to make sure that they’re the right size. Here are some tips on how to try on rollerblades:
- Make sure you have the right size foot for the blade. You can measure your foot length and width to find out what size you need.
- Once you have the right size, put on the rollerblade and stand up. Make sure that your toes are touching the front of the boot and that your heel is firmly planted in the back.
- Bend your knees and squat down into a skating position. Your feet should be comfortable and not too cramped in the boot.
- If everything feels good, then you’ve found a good fitting pair of rollerblades!
Frequently Asked Questions
Do rollerblades come in different widths?
Yes, rollerblades do come in different widths. Just like with shoes, there are narrow, medium, and wide widths available. It’s important to choose a pair of rollerblades that fit snugly but not too tightly. You don’t want your feet to feel cramped up while you’re skating.
If you’re not sure what width is best for you, it’s always a good idea to visit a local skate shop and try on a few pairs. The knowledgeable staff will be able to help you find a pair of rollerblades that fit well and offer the right level of support.
Should I use my shoe size or my foot length?
When choosing rollerblades, you should use your foot length as the primary guide, rather than your shoe size. This is because there can be significant variation in sizing between different brands and manufacturers. By using your foot length, you can more accurately find a pair of rollerblades that will fit you properly.
To measure your foot length, simply place a ruler or measuring tape on the floor and placed your heel at the start of the tape. Then, stretch the tape out along the top of your foot to your toes. Make sure to keep the tape level and straight, then take a measurement at the longest point. This is your foot length, and it will be helpful in finding a pair of rollerblades that fits properly.
Keep in mind that different brands and models of rollerblades may have different sizing systems, so you may need to refer to the manufacturer’s size chart to determine the correct size for you.
Do Rollerblades stretch out?
It is not uncommon for rollerblades to stretch out slightly after being worn a few times. This is because the materials used to make rollerblades, such as leather and plastic, are natural materials that will conform to your feet over time. While this may seem like a disadvantage, it can actually be used to your advantage when sizing rollerblades.
If you purchase a pair of rollerblades that are slightly too small, don’t worry – they will likely stretch out to the perfect size after being worn a few times. On the other hand, if you purchase a pair of rollerblades that are too large, you may find them difficult to break in and wear comfortably.
Can women buy men’s rollerblades?
Yes, women can absolutely buy men’s rollerblades. In fact, many women find that men’s skates offer a better fit than skates designed specifically for women. The main difference between men’s and women’s skates is the width of the footbed – men’s skates tend to have a wider footbed, while women’s skates have a narrower footbed. However, this is not always the case, and there is no guarantee that a pair of men’s skates will be wider than a pair of women’s skates. If you are unsure about the width of the footbed, it is best to try on both types of skates before making a purchase.
Do inline skates fit true to size?
Inline skates do tend to fit true to size, but there are a few things to keep in mind when choosing the right pair of skates. First, consider the type of skating you’ll be doing. If you’re planning on doing mostly recreational skating, you’ll want a more comfortable fit than if you’re looking to do competitive skating. Second, take into account the width of your feet.
Inline skates are available in both regular and wide widths, so make sure to try on both before making your final decision. And finally, don’t forget to break in your new skates! After wearing them for a few hours or days, they should start to feel more comfortable and conform to the shape of your feet.
Should I size up or down for rollerblades?
It’s generally best to size rollerblades slightly larger than your shoe size, so that you have enough room to move your feet and toes comfortably while skating. This will also allow you to wear thicker socks if needed for extra cushioning and support.
It’s also a good idea to try on the rollerblades before you purchase them to make sure they fit well and feel comfortable. You should be able to wiggle your toes and move your feet freely inside the boots. If the rollerblades feel too tight or too loose, you may need to adjust the size or try a different brand or model.
How do I know if my rollerblades are too big?
There are a few signs that your rollerblades may be too big:
- Your feet slide around inside the boots: If your feet slide around inside the boots when you’re skating, it can be difficult to maintain balance and control. This can also lead to blisters and other foot irritation.
- You have a lot of space between your toes and the front of the boot: If you have a lot of space between your toes and the front of the boot, it can indicate that the rollerblades are too long for your feet. This can cause your toes to slam against the front of the boots when you’re skating, which can be painful and uncomfortable.
- The boots feel loose or unstable: If the boots feel loose or unstable when you’re skating, it can be difficult to maintain balance and control. This can also increase the risk of falls and injuries.
- The boots feel too roomy: If the boots feel too roomy, it can indicate that they are too wide for your feet. This can cause the boots to feel unstable and make it difficult to skate comfortably.
Is it better for rollerblades to be tight or loose?
It’s generally best for rollerblades to fit snugly, but not too tight or too loose. A good fit should allow you to move your feet freely inside the boots, while also providing enough support and stability for skating.
If your rollerblades are too tight, they may cause discomfort and restrict movement, which can make it difficult to skate comfortably. Tight rollerblades may also cause pressure points or blisters on your feet.
On the other hand, if your rollerblades are too loose, they may feel unstable and make it difficult to maintain balance and control while skating. Loose rollerblades may also cause your feet to slide around inside the boots, which can be uncomfortable and increase the risk of falls and injuries.
Should my toes touch the end of my rollerblades?
It’s generally best for your toes to have a little bit of room to move and wiggle inside your rollerblades, but they shouldn’t be too long or too wide. If your toes are touching the end of the boots when you’re skating, it can indicate that the rollerblades are too small for your feet. This can cause your toes to slam against the front of the boots when you’re skating, which can be painful and uncomfortable.
To determine the correct size for rollerblades, it’s usually best to use a sizing chart or measure your feet using a ruler or tape measure. Then, compare your foot measurement to the size chart for the specific brand and model of rollerblades you are considering. If your measurement falls between two sizes, it’s usually best to choose the larger size for a more comfortable fit. It’s also a good idea to try on the rollerblades before you purchase them to make sure they fit well and feel comfortable.
When trying on rollerblades, you should be able to place your index finger between your heel and the back of the boot when it’s laced up. This will ensure that the boots are long enough to accommodate the length of your feet, while still providing enough support and stability. You should also be able to wiggle your toes and move your feet freely inside the boots. If the rollerblades feel too tight or too loose, you may need to adjust the size or try a different brand or model.
Conclusion
If you’re looking for the perfect pair of rollerblades, it’s important to choose the right size. You can measure your foot length and width at home to get started. Once you have your measurements, consult a sizing chart to find the right size rollerblades. You may need to make some adjustments to get a perfect fit, but with a little effort, you’ll be skating in comfort in no time.