Hanging a skateboard on the wall is an awesome way to display your board. It’s also a fun way to decorate your room. This article will teach you how to hang a skateboard on the wall attractively and conveniently. We will see four different methods but you will have to do two things first. 

1. Choose Your Wall Space

First, choose where you would like to place your new artwork. You should choose a spot that has enough space for it to stand out without being too large. If you have a small room, then this may not work well for you. However, if you have a larger area, such as a hallway, living room, garage, etc., then you might find that this works very nicely.

2. Measure Out The Board’s Size

Once you know what size of art piece you wish to display, measure out its dimensions. This includes width, length, height, and depth. Make sure that these measurements fit within the walls of your chosen location. For example, if you plan to put your skateboard against a wall, make sure that the entire thing does not extend past the edge of the wall.

How To Hang Skateboard On Wall?

Now there are four easy ways you can try hang your favorite skateboard on the wall:

1. Using Fishing Line
2. Using a Rope
3. Using a Skateboard Wall Mount Kit
4. Hanging without using nails or drills

Let’s discuss each of the methods in detail below.

Method 1: Hanging a Skateboard Deck with Fishing Line

This is the most common method to hang a deck vertically. It requires no tools at all. All you need to do is tie a fishing line around the top of the board and attach it to something sturdy. Then just pull down until the board hangs straight. You don’t need any special skills to accomplish this task. Just follow our simple instructions below for mounting a skateboard on the wall.

Materials Needed:

• Fishing line
• Nails
• Hammer
• Pliers
• Scissor

Detail Instructions:

Step 1: If you’re using a regular skateboard, remove both truck assemblies from the bottom of the board by unscrewing the bolts holding them onto the deck. Use pliers to keep the bolts in place and remove the corresponding screw by using a screwdriver.

Step 2: Feed one end of the fishing line through the center holes aka screw holes located near the nose of the board. Cut the opposite side of the fishing line with a scissor keeping 1-foot distance off the board. Now knot the loose ends together. Also, make sure the knot isn’t too close to the deck to make hanging easier.

Step 3: Now, hammer a nail into the wall where you’d like the deck to display. Hammer until the nail is flush against the wall. Once done, hang the fishing line over the head of the nail.

Step 4: Repeat steps 1–3 for every skateboard you’d like to mount on the wall. Use a scale and pencil to measure and draw lines between each board so that they can all be hung at the same distance and height. Make sure that each of them is evenly spaced out. Mark the wall using a measuring tape and pencil.

Method 2: Hanging a Skateboard Deck Using A Rope

Another way to hang a skateboard on the wall is to use a rope instead of a fishing line. This is one of the best methods because it allows hanging a skateboard with wheels on the wall. Many people prefer ropes because they tend to last longer. They also require less maintenance since they won’t get dirty easily. Plus, they look more professional. 

Materials Needed:

• Rope
• Screws/Nails
• Scissor

Detail Instructions:

Step 1: You have to cut a thick rope, 1/4 inch in diameter and 64 cm long. The rope should be durable enough to withstand the weight of your board for a long period of time.

Step 2: Tie a knot at both ends of the rope and burn for a couple of seconds under each knot so that they don’t fry.

Step 3: Draw 2 horizontal lines on the wall in equal height. Make sure they’re not too close together so there’s enough space between them.

Step 4: Now you’ll push a screw through the center of each knot into the wall at each marked spot. This will give you a nice rope hanging between the two horizontal spots in the wall. Place one of your skateboard trucks on the rope. This will hang up your board vertically on the wall.

A word of caution though– Always double-check that the rope isn’t going to cause harm to anyone who walks nearby. Secure the rope to a strong point on the wall. And if possible, try to avoid putting the rope anywhere close to electrical outlets.

Method 3: Hanging a Skateboard With Wall Mount Kit

The third option involves installing a skateboard wall mount kit. You’ll find various types of wall mount kit in the market, but we’ll be using the Sk8ology Skateboard Deck Display Rack for this example. This is a great wall mount kit for skateboard wall art. The kit hides behind the board once installed, giving an impression that it is floating into the air.

This skateboard rack consists of two simple components: metallic arms and a plastic base plate. Both components work together to provide a stable platform for your skateboard. Installing these types of mounts requires only basic carpentry skills.

Materials Needed:

• Drilling Machine
• Measuring Tape
• Philip Screwdriver
• Sk8ology Deck Display Rack

Detail Instructions:

Step 1: First of all, you need to decide on which part of the wall you want to hang up your skateboard deck. Mark your spot on a suitable place not too close or too far from the top and the side wall.

Step 2: Now drill hole on that particular spot of the wall where we will be installing the deck display rack. Insert a drywall anchor into the hole.

Step 3: Insert the provided screw into the display fixture and screw it into the wall. Once the display is up press the board onto the T-nuts (metallic arms). If the board doesn’t fit the display precisely, drill out some wood from the lower front holes of the nose.

Step 4: If you want the board to be locked on to the wall so that it can’t be taken off easily, you’ll need to remove the black T nuts from the arms and move the bolts down about an inch first.

Once done, slide the board though the mounting arms and re-attach the black t nuts. Make sure the wide part of the nut is facing outside. Finally fix the board’s position on the arm and tighten up the bolts on the back of the deck. If you do all these steps properly you should end up with your skateboard deck floating perfectly off the wall.

Method 4: Hanging a skateboard Without Nails or Drills

If you don’t feel like drilling holes into the wall, you could opt for hanging the board using adhesive tape. The best thing about this method is that it doesn’t require any tools and can be done in just minutes!

Step 1: Measure your walls and find out how much space there will be between them. You need enough room so that when you put up the board on both sides, they won’t touch each other. If you have two-inch gaps all around, then you’ll only need one piece of tape per side. However, if you’re going to use more than three inches of the gap, you might want to buy extra pieces of tape. It’s better to overdo it rather than underdoing it.

Step 2: Place the first strip of tape horizontally across the top edge of the backside of the board. Make sure that the edges of the tape overlap slightly at least ¾-inch. This way, you get an additional layer of protection against scratches.

Step 3: Now place another horizontal strip of tape vertically along the bottom edge of the same side. Again make sure that the ends of the tapes are overlapping.

Step 4: Repeat steps 2 & 3 with the remaining strips of tape until you’ve covered every surface of the board.

Step 5: Once you’re finished, take off the excess tape from the corners and smooth down the entire surface using your fingers.

Step 6: Use some spray paint to give the whole setup a fresh look.

A Word Of Caution- Despite being the simplest method for hanging decks, it has the potential to backfire in the long run because the strips aren’t going to last forever. They may fall off as a result of a loss of adhesive strength induced by the application of board weights, or simply as a result of the aging process. They are expected to last less time than drills. So keep your eyes open and replace the strips before it’s too late.

Conclusion…

Nothing could be more frustrating for a skateboarder than not being able to display his unique collection of boards in front of the world. But thanks to our guide above, we hope that you now know exactly what options are available to you.

Having said that, when it comes to hanging a skateboard on the wall there are many ways, but none of them are perfect.  Each comes with its own set of pros and cons. As such, we recommend trying different methods and see which works best for you. We wish you good luck and happy skating!

Read More:

• Cheap longboards for you
• Longboards for carving
• Cruiser longboards
• Best way to tighten skateboard trucks
• Fix squeaky truck problem
• Bamboo or maple for longboards?

In the world of recreation, cruising around the city with a skateboard is a very popular activity. No matter the age group you are in, you will find cruiser skateboarding fun and practical for running small errands.

But a lot of people seem to have the wrong idea about how to ride a cruiser skateboard safely and effectively. Well, all these will change as we will cover ins and outs of riding a Cruiser skateboard today.

If we summarize the process, riding a cruiser skateboard boils down to five things.

• Take-off
• Balance
• Maneuver
• Accelerate
• Brakes

As long as you have good control over the above points, you have nothing to fear. These are the basic mechanisms for skateboard riding regardless of the skateboard style. Every rider knows these. With a little bit of patience and practice, all these will become your muscle memory. 

What Is A Cruiser Skateboard?

Before we jump right in, let us give you a proper understanding of what a cruiser Skateboard is. From the manufacturing standpoint, cruiser skateboards are pretty unique. Usually, they come in small form factors ranging from 22 inches to 32 inches in length.

The widths of these skateboards are also narrow around 7- 9.5 inches according to length. Though you see many shapes from different manufacturers, penny boards are the most popular. They are the smallest variations of the cruising skateboard. Their lightweight construction and nimble riding style welcome all spheres or riders, be that are professionals or beginners.

Read: Can You Do Tricks on a Cruiser Board?

Notable Features Of Cruiser Skateboard

Cruiser skateboards come with specific sets of features and they perform differently than other skateboards on the market. Apart from the different sizes, these boards are made up of plastic or wood material. Usually, the cruiser skateboards have 7-8 plies in the deck which can carry around 330 lbs.

One thing to note, longboard cruisers are not a high-performance skateboards. So, you can’t jump on a downhill track or show cool trick moves in Skate Parks comfortably. Cruiser skateboards are mainly intended for use on paved flat roads.

In short, here are the features you will enjoy with cruiser skateboards.

• They are easy to carry around
• Very agile and easy to maneuver
• Manageable deck sizes are available
• Beginners get used to them quickly
• Come with large wheels with lots of grips
• Perfect trucks, suitable for city travel
• Best for short rides and running errands

Hope this clears out why professionals often suggest cruisers for beginner skateboarders. And if you are looking for more diverse and high-performing skateboards, check out our reviews on top rated skateboards for all.

How To Ride A Cruiser Skateboard?

When it comes to riding a skateboard, there are a number of ways you can follow. But mastering the basics is very important as it will keep you safe and get the most out of your cruiser. This applies to every skateboard riding as well. So if you plan to switch up in the future, don’t worry.

Remember, cruisers have a low center of gravity. So it’s very normal for a cruiser to be agile. Furthermore, due to the soft grip on the wheel, they are only suitable for flat roads. You can still ride your cruiser skateboard over some cracks and holes, but don’t go off-road. Don’t forget your safety gear. Gloves, helmet, elbow pad, knee pad these are the essential safety gears for skateboarding.

Here are the steps you need to master for chill cruising around your neighborhood.

Proper Take-Off

This is the first step which includes the foot placement and initial launch maneuver. There are no absolute rules for this step. After you have a fair share of your experience this will hardly matter. But for beginners, this is very crucial.

First, make a rough guess, which one is your dominant foot. For most people, it’s the right foot. If your left foot is dominant, that’s also fine. If you are not sure, make your friend push you and see which foot comes up first to balance. That’s your dominant foot and it will be on the front of your skateboard.

Now, place your dominant foot vertically on the board. It should be right over the front truck. After this, try to push yourself with the other foot. It should slide nicely and easily. Do a bit of practice to familiarize yourself with the initial motion and footwork.

Keeping The Balance

After the initial launch, take your other foot and place it on the board perpendicularly. Then change your dominant foot placement the same as the other one. This should look like a “W” stance. Now for balance, keep your eyes forward and knees bent. You can widen your elbows for additional balance.

For beginners, it’s natural to break the balance. That’s why you need to practice the take-off repeatedly. Give a small push and coast with both feet on the board. Do this as long as you need to feel comfortable rolling at a slow speed.

Maneuver

While you are cruising at low speed try to turn the board for a small maneuver. The easy way to do that is by slightly tilting the back edges of the board. Gently press with your back foot to do a turn maneuver. If you press the right edge of the board, the board will turn to the right. Press the left edge to go left.

Accelerate

Assuming you have learned the above steps, let’s add some speed to your cruiser. This is relatively easy when you have good balancing going on with your dominant foot. Do not try to accelerate before you have mastered the balancing.

So to gain speed, you have to push yourself with the other foot as quickly as possible. Do the kicking 4-5 times or until you reach the desired speed. Remember; do not try to turn your board at high speed especially, if you are still new to skateboarding.

Brakes

There are many ways you can slow down your skateboard. You will see professionals using sliding, board tail, foot, and hands (with gloves) to slow down their skateboard. For the beginner, the foot brake is the perfect way to slow down your board.

The foot brake works by friction. While cruising, lower your back foot on the road and let it slide gently. Push it harder for an effective brake. Remember to lower your body and keep the braking foot close to the board.

Conclusion…

Hope this article helps you understand the basics of how to ride cruiser skateboards. Always wear safety gear and practice whenever you can. After a while, you will see the difference in your riding style and confidence. Happy cruising!

The deck is one of the most crucial parts of the longboard that provides better balance, support while riding, effortless control, and also prevents accidents. An ordinary deck will not offer such advantages and assistance when you surf on the longboard.

Although bamboo and maple deck longboards are popular nowadays, most people are confused about which one is better for longboarding. In general, both bamboo and maple longboards are fantastic based on their features, but some qualities make them different. Bamboo longboards are highly flexible and durable, and you can flex without worrying. This type of board is good for experienced riders.

In contrast, maple longboards are quite strong and come with minimal flexibility due to their durability that is good for newbie riders. However, there are many more aspects that we will let you know through this context.

Bamboo Vs. Maple Longboards

Bamboo longboards are quite suitable due to experienced riders for their durability and lightweight. This type of longboard provides maximum durability against cracks and bumps. Bamboo longboards also help maintain the balance of the environment. For that, the longboard has gained popularity for its speed and agility.

Maple longboard is the best choice for downhill riding for those who want to gain desirable speed in a short time. The deck is quite stiff, stable, and durable as maple longboard wood is heavy in weight. Thus, the rider can be sure that the longboard will provide much more support and stability than the regular longboard.

In addition, if we talk about the pricing of these two longboards, both prices are pretty reasonable. You will find a bamboo or maple longboard under 150 bucks which comes in different styles and designs.

Differences Between Bamboo and Maple Longboards

When choosing a longboard between bamboo and maple, there are a few factors you need to consider. Below we have a competitive discussion between bamboo and maple longboards that will help you choose the best one.

Durability

Bamboo longboard decks are made of durable fiber and sustained bamboo wood, making them more flexible and strong. As a result, bamboo longboards bring yield strength to give more durability.

On the other hand, maple longboard decks are made of maple wood fibers that are very durable and resilient. Typically, a maple wood deck is made with multiple ply maple hardwoods that help provide maximum endurance.

Weight Capacity

Weight strength is a crucial factor when you are an adult rider. The average weight of an adult rider is between 200lbs and 300lbs. Bamboo longboards are made with a durable fiber that easily carries up to 250lbs.

As maple longboards are made of multiple plywoods, make them heavyweight. The maximum loading capacity of this type of longboard is 250lbs to 350lbs. If you are an adult rider, you should choose a maple longboard.

Read: How many calories can you burn longboarding?

Balance Supportive

Most riders do not feel comfortable and cannot ride properly with bamboo longboards. This is because the bamboo longboards are smooth, making it difficult for the rider to control and balance properly.

On the contrary, maple longboards provide the most benefits and are very supportive. Maple longboards are built with flexible durability that will not let the rider fall down easily.

Riding Styles

The longboard riding style mainly differs from the longboard. There are several riding styles available like stunting, curving, cruising freestyle riding, and many more. Bamboo longboards are good for stunting and surviving riding styles. On the other hand, maple longboards are compatible with all types of riding styles, including cruising freestyle riding.

Read: How to Make Longboard Wheels Spin Longer?

Long-Lasting Capacity

Everyone wants to buy a longboard that will be long-lasting so that they do not have to buy another frequently. Bamboo longboards are made of a combination of fiberglass and bamboo, so they will not corrode easily. This type of longboard can last from about 1.5 years to more than two years. On the other hand, maple longboards also offer superior, long-lasting capacity and can last up to 1-1.5 years.

Is Bamboo or Maple Better for Longboards?

After considering all the factors of bamboo and maple longboard, you might have found which longboard will be suitable for you. Choosing a longboard between bamboo and maple mostly depends on you and your abilities. Basically, both bamboo and maple have different characteristics and identities.

If you have enough knowledge about longboarding, a bamboo longboard will be suitable for you. On the contrary, if you are a newbie and sometimes encounter problems while maintaining the balance of the longboard, then a maple longboard would be a good choice for you like the Leeyoo.

In What Ways Bamboo Longboards Are Better Than Maple Longboards?

There are several factors why bamboo longboards are better than maple longboards. Although most people think that maple longboards are strong because of their wood, the decks of bamboo longboards are not so weak. Besides, the quality of bamboo decks is improving continuously.

Below we have pointed out some main reasons that will help you know which parts of the bamboo longboard are better than the maple longboard.

• The deck of the bamboo longboards is constructed with fiberglass, where maple is only maple wood.
• Bamboo longboard decks are very flexible and playable than maple longboard decks.
• Maple Longboard decks are not so long-lasting as regular longboards.
• Compared to the maple longboards, bamboo longboards are lighter.
• The decks of the bamboo longboards are more tractable than maple longboards decks.

One of our most-read blogs is about the review of the bamboo longboard from Retrospec Zed. You can guess from the topic why…

Which One Is More Eco-Friendly Between Bamboo and Maple?

If we talk about the eco-friendliness of bamboo and maple longboards, bamboo longboards will definitely win against maple longboards. This is because bamboo trees can grow very fast, and it takes about five years to grow a shoot fully. And bamboo can easily regrow from shoots. As a result, bamboo will not have much effect on deforestation.

The scene is completely different for maple trees. As maple trees cannot grow from shoots, these trees need to be replanted. Also, maple trees take about 30 to 40 years to mature fully. As a result, cutting down maple trees can adversely affect our environment. According to a recent report from North America, maple longboards are a significant cause of maple forest deforestation.

Conclusion

Both bamboo and maple longboards are absolutely worthy of your investment. These two longboards have their own features that are designed for different purposes.

Through this context, we have given adequate information about these two longboards.

If you have read the above discussion, you might have understood which longboard is suitable for you.

In general, bamboo longboards are more flexible and eco-friendly compared to maple longboards. But if you are searching for a durable longboard, maple could be a good choice. So, choosing a longboard totally depends on your abilities.

Read More:

• Are longboards supposed to blend?
• Want skateboard or longboard for college?
• Maple-made longboard from Minority
• Sanview Longboard