Skateboarding In - Skating - When You Just Feel Like It.

How To Clean Skateboard Helmets?

It does not matter whether you’re a professional or a beginner-level skateboard rider. Safety gears are a must, especially helmets.

And like every other gear, regularly using a helmet can build up dirt and sweat, which can cause discomfort and bad odor. Wearing a dirty or smelly helmet can hamper your riding experience.

This is why it is recommended to clean your skateboard helmet from time to time or at least when it’s needed. Now you might be wondering, “But how do I do it?”

Don’t worry; we are here to show you how to clean skateboard helmet. The cleaning process is fairly simple if you follow the steps mentioned below properly. So, let’s jump right in.

How to Clean Skateboard Helmets? Explained…

Cost: you probably have all the things we will be using here, but if you don’t have them, the whole process can cost around 5 to 10 dollars. Yes, it is that cheap.

Read: How Much Does A Skateboard Helmet Cost?

Time: depending on your cleaning speed, you can easily put a shine on your skateboard helmet in approximately 5 minutes.

Read: How to Look Cool Wearing a Skateboard Helmet?

Cleaning skateboard helmets do not require too many tools or materials. So, let’s look at what we need to get rid of those nasty smells and dirty outlook.

Any ordinary dish detergent liquid.
A brand new toothbrush.
A face towel.
A kitchen sink.

Read: Skateboard helmet or bike helmet?

Now that we got everything needed let’s begin the process.

Step 1 – Preparing The Water.

To start the process, you need to block the kitchen sink to not drain the detergent water we will be using.

After blocking the sink, turn on the tap and let the sink fill up about 20 to 30 percent. Remember not to fill up the whole sink as it will only be wastewater.

After filling up the kitchen sink, put 5 or 6 drops of dish detergent liquid. You can put more drops if you want. Just make sure the water gets soapy. Stir the water for 30 seconds, and you are done preparing.

Read: Skateboard Helmet Laws

Step 2 – Beginning The Cleaning Process.

After your kitchen sink water is all bubbly and soapy, you have to gently put the helmet under the sink water.

Don’t worry about the foam pads inside the helmet getting damaged, but you can take them out and clean them separately if you are worried.

After putting the helmet under water, shake it multiple times so that the water reaches every corner of the helmet. Soaking the whole helmet is necessary, and you should not skip it.

Read: What size skate helmet do you need?

Step 3 – Brushing

Once your helmet is all soaked and wet, bring out the brush. Start with the exterior of the helmet. Dip the toothbrush in the detergent water and aggressively rub it on the helmet.

Dip the toothbrush once again after every 4 or 5 rubs. Continue doing this until you are satisfied with the outlook.

Now move into the interior. Start with the helmet straps. Follow the previous step and dip your brush in the water.

But this time, you have to be gentle. Don’t put too much force, or else it might ruin the fabric. Once you are done with the straps, move deeper.

Read: Choose the right wrist guards for your safety

Step 4 – Finishing Off The Cleaning.

After scrubbing off the dirt with the toothbrush, put the helmet under the tap and wash it thoroughly. Now take the face towel and start wiping the helmet. Make sure there is no soap left.

Now all you gotta do is let the helmet dry, and you are finished. Yes, Cleaning longboard helmet is that easy.

Read: How to clean a white helmet?

Final Words…

Regularly cleaning your skateboarding gears is as important as wearing them. And the helmet is the most important one because it sits right on top of your head. If it looks dirty or smells bad, it can cause discomfort, which will eventually affect your experience.

Some people are too nervous about cleaning their helmets because they think they might damage them. As we have shown you here, cleaning helmets is fairly easy, simple, and effective.

So, if your skateboard helmet starts to show signs of wearing out, just take out your detergent and brush, and breathe new life into it. Hope our article helps you accomplish that.

Is Bamboo or Maple Better for Longboards?

Amelia Reed Leave a Comment

The deck is one of the most crucial parts of the longboard that provides better balance, support while riding, effortless control, and also prevents accidents. An ordinary deck will not offer such advantages and assistance when you surf on the longboard.

Although bamboo and maple deck longboards are popular nowadays, most people are confused about which one is better for longboarding. In general, both bamboo and maple longboards are fantastic based on their features, but some qualities make them different. Bamboo longboards are highly flexible and durable, and you can flex without worrying. This type of board is good for experienced riders.

In contrast, maple longboards are quite strong and come with minimal flexibility due to their durability that is good for newbie riders. However, there are many more aspects that we will let you know through this context.

Bamboo Vs. Maple Longboards

Is Bamboo or Maple Better for Longboards

Bamboo longboards are quite suitable due to experienced riders for their durability and lightweight. This type of longboard provides maximum durability against cracks and bumps. Bamboo longboards also help maintain the balance of the environment. For that, the longboard has gained popularity for its speed and agility.

Maple longboard is the best choice for downhill riding for those who want to gain desirable speed in a short time. The deck is quite stiff, stable, and durable as maple longboard wood is heavy in weight. Thus, the rider can be sure that the longboard will provide much more support and stability than the regular longboard.

In addition, if we talk about the pricing of these two longboards, both prices are pretty reasonable. You will find a bamboo or maple longboard under 150 bucks which comes in different styles and designs.

Differences Between Bamboo and Maple Longboards

When choosing a longboard between bamboo and maple, there are a few factors you need to consider. Below we have a competitive discussion between bamboo and maple longboards that will help you choose the best one.

Durability

Bamboo longboard decks are made of durable fiber and sustained bamboo wood, making them more flexible and strong. As a result, bamboo longboards bring yield strength to give more durability.

On the other hand, maple longboard decks are made of maple wood fibers that are very durable and resilient. Typically, a maple wood deck is made with multiple ply maple hardwoods that help provide maximum endurance.

Weight Capacity

Weight strength is a crucial factor when you are an adult rider. The average weight of an adult rider is between 200lbs and 300lbs. Bamboo longboards are made with a durable fiber that easily carries up to 250lbs.

As maple longboards are made of multiple plywoods, make them heavyweight. The maximum loading capacity of this type of longboard is 250lbs to 350lbs. If you are an adult rider, you should choose a maple longboard.

Read: How many calories can you burn longboarding?

Balance Supportive

Most riders do not feel comfortable and cannot ride properly with bamboo longboards. This is because the bamboo longboards are smooth, making it difficult for the rider to control and balance properly.

On the contrary, maple longboards provide the most benefits and are very supportive. Maple longboards are built with flexible durability that will not let the rider fall down easily.

Riding Styles

The longboard riding style mainly differs from the longboard. There are several riding styles available like stunting, curving, cruising freestyle riding, and many more. Bamboo longboards are good for stunting and surviving riding styles. On the other hand, maple longboards are compatible with all types of riding styles, including cruising freestyle riding.

Read: How to Make Longboard Wheels Spin Longer?

Long-Lasting Capacity

Everyone wants to buy a longboard that will be long-lasting so that they do not have to buy another frequently. Bamboo longboards are made of a combination of fiberglass and bamboo, so they will not corrode easily. This type of longboard can last from about 1.5 years to more than two years. On the other hand, maple longboards also offer superior, long-lasting capacity and can last up to 1-1.5 years.

Is Bamboo or Maple Better for Longboards?

After considering all the factors of bamboo and maple longboard, you might have found which longboard will be suitable for you. Choosing a longboard between bamboo and maple mostly depends on you and your abilities. Basically, both bamboo and maple have different characteristics and identities.

If you have enough knowledge about longboarding, a bamboo longboard will be suitable for you. On the contrary, if you are a newbie and sometimes encounter problems while maintaining the balance of the longboard, then a maple longboard would be a good choice for you like the Leeyoo.

In What Ways Bamboo Longboards Are Better Than Maple Longboards?

There are several factors why bamboo longboards are better than maple longboards. Although most people think that maple longboards are strong because of their wood, the decks of bamboo longboards are not so weak. Besides, the quality of bamboo decks is improving continuously.

Below we have pointed out some main reasons that will help you know which parts of the bamboo longboard are better than the maple longboard.

The deck of the bamboo longboards is constructed with fiberglass, where maple is only maple wood.
Bamboo longboard decks are very flexible and playable than maple longboard decks.
Maple Longboard decks are not so long-lasting as regular longboards.
Compared to the maple longboards, bamboo longboards are lighter.
The decks of the bamboo longboards are more tractable than maple longboards decks.

One of our most-read blogs is about the review of the bamboo longboard from Retrospec Zed. You can guess from the topic why…

Which One Is More Eco-Friendly Between Bamboo and Maple?

Differences Between Bamboo and Maple Longboards

If we talk about the eco-friendliness of bamboo and maple longboards, bamboo longboards will definitely win against maple longboards. This is because bamboo trees can grow very fast, and it takes about five years to grow a shoot fully. And bamboo can easily regrow from shoots. As a result, bamboo will not have much effect on deforestation.

The scene is completely different for maple trees. As maple trees cannot grow from shoots, these trees need to be replanted. Also, maple trees take about 30 to 40 years to mature fully. As a result, cutting down maple trees can adversely affect our environment. According to a recent report from North America, maple longboards are a significant cause of maple forest deforestation.

Conclusion

Both bamboo and maple longboards are absolutely worthy of your investment. These two longboards have their own features that are designed for different purposes.

Through this context, we have given adequate information about these two longboards.

If you have read the above discussion, you might have understood which longboard is suitable for you.

In general, bamboo longboards are more flexible and eco-friendly compared to maple longboards. But if you are searching for a durable longboard, maple could be a good choice. So, choosing a longboard totally depends on your abilities.

How to Stop on Aggressive Inline Skates?

Amelia Reed Leave a Comment

Aggressive skates are special types of inline skates used by expert skaters to play several advanced level tricks like grinding, jumping, sliding, and more. These are the tricks you cannot perform on free and plain roads; rather you need roads or ground stitched with obstacles, parks where you stair to grind, and the likes. You can and should start that type of skating when you have mastered the basic tricks to the list.

Therefore, mastering the techniques of how to stop on aggressive inline skates involves the advanced level techniques or the mid-level ones of inline speed skating.

We, in this short guide, will focus on stopping skills of advanced and intermediate stages of inline speed skating.

8 Expert Techniques to Stop on Aggressive inline Skates

Here you go with 8 pro-techniques to stop on aggressive inline skates like master skaters.

Wind-breaking Technique

As is made clear at the outset, aggressive skating is the fastest skating that means you will be running at break-neck speed then. Whether it is a windy day or not, you can windbreak to slow your motion and come to a complete halt sooner. A windy day will give you added convenience to stop like that. For an expert tip, wearing something like a jacket will also help you catch more wind and thus stop faster.

180 Degrees Twist

You can stop in a hurry even while at great speed. Suppose, you are gliding at great speed and spread your legs shoulder width. Now, keeping your toes pointing ahead; twist your body and hip by 180 degrees suddenly. Thus the spinning motion will slow down and you can stop faster if not then and there. Unlike the wind-breaking technique, you can apply this stopping method while gliding at full speed.

Twist Right & Left

Another method that may help you stop at crazy speed is to turn right and left sharply and immediately. While gliding at a great speed, just turn right sharply and without heading towards that direction, now turn left at equal sharpness. That will significantly slow you down and you can stop immediately. And the method easy is enough for the intermediate skaters to apply successfully.

Read: How to stop in rollerblades?

Curb Ramming

To begin with advanced technique, you can halt immediately amid high speed by skating towards a step or curb. And at reaching the curb or step, lift one skate up so that you can put the line of the skate hardly down. That should slow you down instantly but you need to brace yourself to protect against any possible hurting. For your information, this method of stopping in aggressive skating can damage your costly skates. So, apply this technique only when you badly need to stop in hurry.

But the top-quality aggressive inline skates made of carbon fibers will absorb the shock when they are not so frequent.

The Famous T-stop

T-stop is perhaps the most widely used stopping technique but an easy one to be practiced or tried by the mid-level skaters let alone the novices. While grinding, jumping, or performing other tricks you may need an immediate stop. So when on a plane ground, drag one of your legs back and turn the toes sideways.

Thus the skate in front will be approaching toward the traveling direction and in perpendicular to the hind skate. This will slow your momentum and if you press down the back skate hard, you will instantly come to a full stop. Again, this method may prove damaging to your skates.

Power Slide

When you are moving at a killer speed, if you make a very sharp turn to left or right, this will destroy the momentum. Now, if you keep traveling sideways, you will stop immediately as it will slow you down to a complete stop in seconds. This is possible only when you are running at a great speed and on a smooth plane. As for expert tip, keep your knee bent and lean back a bit to keep you as much balanced as possible.

Lifting Up Skates

When running at a high speed, you can try this to stop successfully. Lift one leg up and go forward for few steps in your traveling direction. Then again, lift the other leg and do the same before landing down the leg. Thus, you will glide to a complete stop but this is slower than other techniques told about above.

Use the Brake

This is the method master skaters depend on their brakes to stop like an expert. Unlike a novice or beginner, you put pressure on both of your heel brakes at the same time. Thus you will stop instantly and quickly but it involves the risk of falling. As a precaution, brace yourself while trying this method of stopping on aggressive speed skates.

Takeaway…

These are the techniques to apply while you are gilding on break-neck speed on aggressive skates. All these methods will require a certain level of skill as a skater and the last five techniques are for master skaters who can perform the aggressive skates tricks with ease. These are all about how to stop on aggressive inline skates.